MC2 Audio
MCE-90
4500W/4OHMS PER CH STEREO POWERAMP
RRP $7995
The E90 is the newest addition to the E Series. Based on new MC2 proprietary Class-D technology, it has been designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC2 sonic qualities and unsurpassed reliability. Running cool even in the most difficult conditions, the E90 can deliver up to 4500w into 4 ohms and a massive 8000w into 2 ohms, with outstanding distortion figures.
The sophisticated MC2 power control circuits keep the amplifier operating within safe limits and allow it to be operated on standard mains supplies. Together with its switchmode power supply and huge power reservoirs, the E90 is capable of delivering large peaks of energy, producing effortless bass delivery without any perceivable ‘sag’.
Features
• MC2 proprietary Class-D technology with Dual Feedback Loop system for lightning fast transient response, ultra high-definition sound and high efficiency.
• Resonant Switchmode power supply with large power reservoir giving extremely high peak power without any bass ‘sag’.
• All new Over Load (O-Load) limiters, linked to the output current monitors (specific to the E90) and the power supply, keep mains input and amplifier output currents within a safe operating area at all times, whilst maintaining transparent sonic performance.
• All new low distortion limiters with adjustable threshold points for extra speaker protection.
• Lightweight aluminium construction.
• All new, low distortion limiters with adjustable threshold points for extra speaker protection.
• Power Reduction Circuit (PRC) controls on rear panel, linked to the limiter threshold which allow each channel to be independently set so that different loudspeakers can be connected to each channel with safety.
• Full DC, thermal and individual short circuit protection, which automatically disconnects the outputs under a fault condition.
• Soft start ‘power on’ with full in-rush protection.
• Lightweight, aluminium construction.
• Weighs around 11.5 kg
• 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Front Panel: 2 x level controls
1 x power on/off switch
Rear Panel: 1 x Channel link switch
4 x PRC switches (2 per channel)
Indicators: 1 x power, 2 x five segment LED metering
2 x power reduction control (PRC), 1 x auto protect, 1 x link
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 2000
4 ohms @ 1kHz: 4500
2 ohms @ 1kHz: 8000
Mono Bridged
8 ohms @ 1kHz: 9000
4 ohms @ 1kHz: 16000
Power Reduction Control: -2dB/-4dB/-6dB
THD @ Rated Power 4 ohms
1 kHz: < 0.1%
20Hz - 20kHz: < 0.15%
Input CMRR: > 90 dB
Hum & Noise: -108dBA
Gain: +32/+35.75/+38dB
Sensitivity for rated output, 4 ohms: +12.75/+9.75/+6dBu
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz – 20kHz +0.5dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 11.5kg
Power Requirement: 230VAC @15A nominal (4 ohm load)
115VAC @ 30A nominal (4 ohm load)
Efficiency: Up to 84% (Plug to plug)
MCE-4-75
750W PER CH 8/4 OHMS 4-CHANNEL P/AMP
RRP $5295
Designed for use in a wide variety of applications, including touring monitor racks, the E4-75 is a 4-channel amplifier capable of producing 750W/channel into 4 or 8 ohms.
The E4-75 has automatic impedance sensing and changes the power accordingly. Inputs are via four XLR sockets, which can be linked to the next channel via a rear panel switch providing greater flexibility to supply more speakers with the same input signal.
In addition, the E4-75 also has five-segment LED metering for each channel and an indicator to signal 4 or 8 ohm load.
Features
• Four channels delivering 850W peaks into 8 ohms and 900W peaks
into 4 ohms. (Pink noise or music, four channels driven).
• Digital power supply with large power reservoir giving extremely high
peak power
• Automatic impedance sensing, changes the power for either a 4 or 8
ohm load
• Digital power supply with large power reservoir giving extremely high
peak power without any bass 'sag'.MC2 proprietary current driven
output stages for ultra high-definition sound
• Full high frequency power - the E-Series amplifiers will deliver
their power over the entire audio bandwidth
• Lightweight aluminium construction
• Low distortion limiters for speaker protection
• Sophisticated power control system linked to both the limiter and the
power supply, keeping the amplifier within its operating limits at all
times
• Optional cross-over cards available. 24dB/Octave Linkwitz Riley
• Soft start "power-on" with full in-rush protection. Full DC, short circuit
and thermal protection
• Front panel display incorporates five-segment LED metering for each
output, load indicator signalling either an 8 or 4 ohm load and Auto
protect indicator
• Weighs around 10.25kg
• 5-year warranty
Controls
Connectors
Inputs: 4 x XLR 3 pin
Outputs: 4 x 4 pole SPEAKON
Controls
Front Panel: 4 x level controls
1 x power on/off switch
Rear Panel: 2 x PRC switch
3 x link switch
Indicators: 1 x power, 4 x five segment LED metering,
2 x load indicator, 1 x auto protect
Specification
Output Power (Watts RMS) per channel (sine wave continuous each channel):
8 ohms @ 1kHz: 750
4 ohms @ 1kHz: 825
Peak output power (pink noise or music four channels driven)
8 ohms 850
4 ohms 900
Power reduction control -3dB @ 8ohms
THD @ Rated Power
4 ohms @ 1 kHz: < 0.006%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain (selectable): +32dB/+26dB/+31dB
Sensitivity (for rated output, 4 ohms): +5dBu/+11dBu/+6dBu (1.5V)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 10.25 kg
Power Requirement: 230 VAC @ 15 amps max
115 VAC @ 30 amps max
MC - 1250 1250W/40HM PER CH STEREO POWERAMP
RRP $ 6250
This top of the range, no-compromise, ultra-high quality and professional power amplifier has a sonic performance that is comparable to the very best hi-fi amplifiers, only much more powerful. Since its introduction in September 1996, the MC1250 has been extremely successful in the discotheque and night-club market all over the world, where it has proved itself capable of maintaining its high performance levels in the most demanding conditions.
The unique current driven drive stage adds an extra dimension to the bass dynamics, ensuring very accurate reproduction of transients coupled with a natural 'openness' not usually found in amplifiers of this type. The sophisticated microcontroller ensures that this performance is maintained over a wide range of temperatures and loads.
The heatsinks have been specifically designed to maximize efficient heat exchange allowing the MC1250 to be run flat out, all night in the most arduous of conditions, such as in a hot discotheque or night club, without shutting down or cutting out.
Despite the sophistication of the amplifier, its modular design makes it remarkably easy to work with and it also has the option of a remote control facility.
Features
• Complementary class AB bipolar outputs, with unique floating drive stage for optimum audio performance.
• Sophisticated monitoring of load, temperature and operating parameters. If overheating occurs, the power supply is reduced to a safe level - protecting the unit without shut-down.
• Low noise vari-speed fans for quiet operation.
• No dynamic switching of audio outputs or supply voltages.
• User selectable clip limiter with "tight" and "easy" settings which track the supply voltages.
• Accurate Peak Level Meters indicating headroom, which automatically adjust to power supply and load. These double as level control position indicators when adjustments to level are made.
• Mute switches with fade up on release. The "power on" sequence also starts in "mute" and fades the signal up to the previous setting, after checking the system.
• Level controls can be separate or linked. Levels are matched to within 0.2dB at all positions.
• Optional crossover cards available. 24dB/Octave Linkwitz Riley.
• Fully functional bi-directional remote control via RS485 available.
• "2 ohm" and "bridged mode" indicators on front panel.
• Modular construction with proprietary heat sinks for ease of serviceability.
• 1250 watts per channel into 4ohms using dynamic signals (signal dependent).
• Soft start "power on" sequence with full inrush protection.
• Full DC and short circuit (serious fault) protection which automatically reconnects when the fault is cleared. Front panel LEDs indicate fault condition.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin one male & one female per channel in parallel for linking inputs
Outputs: Shrouded 4mm binding posts (2 pairs)
Controls
Rear Panel: 2 ohm/4 ohm + load switch
stereo/bridged mono switch
Front Panel: 2 x rotary encoders (level), 2 x mute switches
1 x level control link switch, 1 x power on/off switch
Indicators: 2 x 6 LED peak level meters: 2 x mute: 2 x fault/DC:
2 x limit: 1 x link: 1 x 2 ohm: 1 x bridged: 1 x power:
1 x temperature warning
Specification
Output Power (Watts RMS) per channel :
16 ohms @ 1kHz: 400
8 ohms @ 1kHz: 750
4 ohms @ 1kHz: 1250
2 ohms @ 1kHz: 1800
Mono Bridged
8 ohms @ 1kHz: 2500
4 ohms @ 1kHz: 3600
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 80 dB
Hum & Noise: -105 dB
Gain: 33dB
Sensitivity for rated output, 4 ohms: +6dBu (1.54v)
Damping Factor 1 kHz, 8 ohms: > 1000
Frequency Response: 20Hz-20kHz +0/-0.5 dB
Input Impedance
(actively balanced): 10k ohms
Dimensions - 2U(mm): 130 x 480 x 460
Weight: 30kg
Power Requirement: 230 VAC @ 20.0 amps max
120 VAC @ 38.0 amps max
MC-750
750W/4OHM PER CH STEREO POWERAMP
RRP $4495
Introduced in October 1997, this technologically innovative, digitally controlled amplifier has been designed to be used in studios, clubs and a wide variety of fixed installations. The unique current driven drive stage adds an extra dimension to the bass dynamics, ensuring very accurate reproduction of transients coupled with a natural 'openness' not usually found in amplifiers of this type. The sophisticated microcontroller ensures that this performance is maintained over a wide range of temperatures and loads.
The heatsinks have been specifically designed to maximize efficient heat exchange allowing the MC750 to be run flat out, all night in the most arduous of conditions, without shutting down or cutting out.
Despite the sophistication of the amplifier, its modular design makes it remarkably easy to work with and it also has the option of a remote control facility.
Features
• Complementary class AB bipolar outputs, with unique floating drive stage for optimum audio performance.
• No dynamic switching of audio outputs or supply voltages.
• Sophisticated monitoring of load, temperature and operating parameters. If overheating occurs, the power supply is reduced to a safe level - protecting the unit without shut-down.
• Low noise vari-speed fans for quiet operation.
• User selectable clip limiter with "tight" and "easy" settings which track the supply voltages.
• Accurate Peak Level Meters indicating headroom, which automatically adjust to power supply and load.These double as level control position indicators when adjustments to level are made.
• Mute switches with fade up on release. The "power on" sequence also starts in "mute" and fades the signal up to the previous setting, after checking the system.
• Level controls can be separate or linked. In "linked mode", adjustments are relative (both channels change by the same amount in dBs).
• "2 ohm" and "bridged mode" indicators on front panel.
• Full DC and short circuit (serious fault) protection which automatically reconnects when the fault is cleared. Front panel LEDs indicate fault condition.
• Modular construction with proprietary heat sinks for ease of serviceability.
• 750 watts per channel into 4ohms using dynamic signals (signal dependent).
• Optional crossover cards available. 24dB/Octave Linkwitz Riley.
• Fully functional bi-directional remote control via RS485 available.
• Soft start "power on" sequence with full inrush protection.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: Shrouded 4mm binding posts
Controls
Rear Panel: 2 ohm/4 ohm load switch
stereo/bridged mono switch
Front Panel: 2 x rotary encoders (level), 2 x mute switches
1 x level control link switch, 1 x power on/off switch
Indicators: 2 x 6 LED peak level meters: 2 x mute: 2 x fault/DC:
2 x limit: 1 x link: 1 x 2 ohm: 1 x bridged: 1 x power:
1 x temperature warning
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 425
4 ohms @ 1kHz: 750
2 ohms @ 1kHz: 1100
Mono Bridged
8 ohms @ 1kHz: 1500
4 ohms @ 1kHz: 2300
THD @ Rated Power 4 ohms
1 kHz: < 0.005%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: 31dB
Sensitivity for rated output, 4 ohms: +7dBu (1.73v)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5 dB
Input Impedance
(actively balanced): 10k ohms
Dimensions - 2U(mm): 88 x 480 x 410
Weight: 21kg
Power Requirement: 230 VAC @ 10.0 amps max
120 VAC @ 20.0 amps max
E-15
750W/4OHM PER CH STEREO POWERAMP
RRP $3395
This lightweight, switch mode amplifier has been designed to the same high standards of reliability and sound quality that our customers have come to expect of all MC2 Audio products.
Aimed at the touring market in particular, the E15 at 750W/channel into 4 ohms, built in a 2U chassis, has all the sonic qualities and reliability of the MC and T Series amplifiers, without the physical weight, making it an ideal choice for touring.
The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new sophisticated MC2 'intelligent' limiter.
Features
• Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.
• MC2 proprietary current driven output stages for ultra high-definition sound.
• Full high frequency power - the E15 will deliver its power over the entire audio bandwidth.
• Lightweight aluminium construction.
• All new, low distortion limiters with adjustable threshold points for extra speaker protection.
• Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times.
• Power Reduction Circuit (PRC) controls on rear panel, linked to the limiter threshold which allow each channel to be independently set so that different loudspeakers can be connected to each channel with safety.
• Optional cross-over cards available. 24dB/Octave Linkwitz Riley.
• Soft start 'power on' with full in-rush protection.
• Full DC, short circuit and thermal protection, which automatically reconnects when the fault is cleared. Front panel LEDs indicate fault condition.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x Stereo/bridged mono switch
4 x PRC switches (2 per channel)
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
2 x -3dB, 2 x power reduction control (PRC),
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 425
4 ohms @ 1kHz: 750
2 ohms @ 1kHz: 1400
Mono Bridged
8 ohms @ 1kHz: 1500
4 ohms @ 1kHz: 2800
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: +32dB/+26dB/+31dB
Sensitivity for rated output, 4 ohms: +5dBu/+11dBu/+6dBu (1.5V)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 9.9kg
Power Requirement: 230 VAC @ 10.0 amps max
115 VAC @ 20.0 amps max
E-25
1250W/4OHM PER CH STEREO POWERAMP
RRP $4350
This lightweight, switchmode amplifier has been designed to the same high standards of reliability and sound quality that our customers have come to expect of all MC2 Audio products.
Aimed at the touring market in particular, the E25 at 1250W/channel into 4 ohms, built in a 2U chassis, has all the sonic qualities and reliability of the MC and T Series amplifiers, without the physical weight, making it an ideal choice for touring.
The switchmode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new sophisticated MC2 'intelligent' limiter.
Features
• Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.
• MC2 proprietary current driven output stages for ultra high-definition sound.
• Full high frequency power - the E25 will deliver its power over the entire audio bandwidth.
• Lightweight aluminium construction.
• All new, low distortion limiters with adjustable threshold points for extra speaker protection.
• Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times.
• Power Reduction Circuit (PRC) controls on rear panel, linked to the limiter threshold which allow each channel to be independently set so that different loudspeakers can be connected to each channel with safety.
• Optional cross-over cards available. 24dB/Octave Linkwitz Riley.
• Soft start 'power on' with full in-rush protection.
• Full DC, short circuit and thermal protection, which automatically reconnects when the fault is cleared. Front panel LEDs indicate fault condition.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x Stereo/bridged mono switch
4 x PRC switches (2 per channel)
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
2 x -3dB, 2 x power reduction control (PRC),
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel
8 ohms @ 1kHz: 650
4 ohms @ 1kHz: 1250
2 ohms @ 1kHz: 2200
Mono Bridged:
8 ohms @ 1kHz: 2500
4 ohms @ 1kHz: 4400
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: +32dB/+26dB/+33dB
Sensitivity for rated output, 4 ohms: +7dBu/+13dBu/+6dBu (1.5V)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 10.25kg
Power Requirement: 230 VAC @ 15.0 amps max
115 VAC @ 30.0 amps max
MCE-45
2250W/4OHMS PER CH STEREO POWERAMP
RRP $5995
This lightweight, switchmode amplifier has been designed to the same high standards of reliability and sound quality that our customers have come to expect of all MC2 Audio products.
Aimed at the touring market in particular, the E45 at 2250W/channel into 4 ohms, built in a 2U chassis, has all the sonic qualities and reliability of the MC and T Series amplifiers, without the physical weight, making it an ideal choice for touring.
The switchmode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new sophisticated MC2 'intelligent' limiter.
Features
• Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.
• Proprietary designed progressive switching rail output.
• MC2 proprietary current driven output stages for ultra high-definition sound.
• Full high frequency power - the E45 will deliver its power over the entire audio bandwidth.
• Lightweight aluminium construction.
• All new, low distortion limiters with adjustable threshold points for extra speaker protection.
• Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times.
• Power Reduction Circuit (PRC) controls on rear panel, linked to the limiter threshold which allow each channel to be independently set so that different loudspeakers can be connected to each channel with safety.
• Optional cross-over cards available. 24dB/Octave Linkwitz Riley.
• Soft start 'power on' with full in-rush protection.
• Full DC, short circuit and thermal protection, which automatically reconnects when the fault is cleared. Front panel LEDs indicate fault condition.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x Stereo/bridged mono switch
4 x PRC switches (2 per channel)
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
2 x -3dB, 2 x power reduction control (PRC),
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 1200
4 ohms @ 1kHz: 2250
2 ohms @ 1kHz: 3200
Mono Bridged
8 ohms @ 1kHz: 4400
4 ohms @ 1kHz: 6400
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: +32dB/+26dB/+35.75dB
Sensitivity for rated output, 4 ohms: +9.75dBu/+15.75dBu/+6dBu (1.5V)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 11kg
Power Requirement: 230 VAC @ 20.0 amps max
115 VAC @ 40.0 amps max
MCT-1000
500W/4OHMS PER CH STEREO POWERAMP
RRP $1995
Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T1000 (500W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls.
The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'.
Features
• Complementary class A/B bipolar outputs, using the unique MC2 current driven floating drive stage, which gives one of the 'cleanest' sounds available.
• Sophisticated monitoring of amplifier temperature and load conditions.
• Proprietary control and protection circuitry continuously checks for all fault conditions such as shorted outputs, DC on outputs, excessive temperature (blocked air flow), component failure etc... and disconnects the outputs, if such an event occurs.
• Low noise vari-speed fans.
• 'Side-chain' clip limiter prevents speaker damage from clipped signals but only comes into the signal path during limiting, and is inaudible during normal operation.
• Audio 'fade-up' on Power-on.
• Optional internal crossover cards available.
• New proprietary 'Ultra Cool' heatsink.
• Full mains inrush protection.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x stereo/bridged mono switch
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 300
4 ohms @ 1kHz: 500
2 ohms @ 1kHz: 700
Mono Bridged
8 ohms @ 1kHz: 1000
4 ohms @ 1kHz: 1380
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: +32dB
Sensitivity for rated output, 4 ohms: +3.5dBu (1.2V)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5 dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 18kg
Power Requirement: 230 VAC @ 8 amps max
115 VAC @ 16 amps max
T-1500
750W/4OHMS PER CH STEREO POWERAMP
RRP $2775
MCT-2000 Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T1500 (750W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls.
The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'.
Features
• Complementary class A/B bipolar outputs, using the unique MC2 current driven floating drive stage, which gives one of the 'cleanest' sounds available.
• Sophisticated monitoring of amplifier temperature and load conditions.
• Proprietary control and protection circuitry continuously checks for all fault conditions such as shorted outputs, DC on outputs, excessive temperature (blocked air flow), component failure etc... and disconnects the outputs, if such an event occurs.
• Low noise vari-speed fans.
• 'Side-chain' clip limiter prevents speaker damage from clipped signals but only comes into the signal path during limiting, and is inaudible during normal operation.
• Audio 'fade-up' on Power-on.
• Optional internal crossover cards available.
• New proprietary 'Ultra Cool' heatsink.
• Full mains inrush protection.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x stereo/bridged mono switch
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 450
4 ohms @ 1kHz: 750
2 ohms @ 1kHz: 1125
Mono Bridged
8 ohms @ 1kHz: 1500
4 ohms @ 1kHz: 2250
THD @ Rated Power 4 ohms
1 kHz: <0.008%
20Hz - 20kHz: <0.03%
Input CMRR: >90 dB
Hum & Noise: -105 dB
Gain: +32dB
Sensitivity for rated output, 4 ohms: +5dBu (870mV)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5 dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 20kg
Power Requirement: 230 VAC @ 10 amps max
115 VAC @ 20 amps max
T2000
1000W/4OHMS PER CH STEREO POWERAMP
RRP $3495
Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T2000 (1000W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls.
The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'.
Features
• Complementary class A/B bipolar outputs, using the unique MC2 current driven floating drive stage, which gives one of the 'cleanest' sounds available.
• Sophisticated monitoring of amplifier temperature and load conditions.
• Proprietary control and protection circuitry continuously checks for all fault conditions such as shorted outputs, DC on outputs, excessive temperature (blocked air flow), component failure etc... and disconnects the outputs, if such an event occurs.
• Low noise vari-speed fans.
• Side-chain' clip limiter prevents speaker damage from clipped signals but only comes into the signal path during limiting, and is inaudible during normal operation.
• Audio 'fade-up' on Power-on.
• Optional internal crossover cards available.
• New proprietary 'Ultra Cool' heatsink.
• Full mains inrush protection.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x stereo/bridged mono switch
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 610
4 ohms @ 1kHz: 1000
2 ohms @ 1kHz: 1500
Mono Bridged
8 ohms @ 1kHz: 2000
4 ohms @ 1kHz: 3000
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: +32dB
Sensitivity for rated output, 4 ohms: +7dBu (1.75V)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5 dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 460
Weight: 25kg
Power Requirement: 230 VAC @ 15 amps max
115 VAC @ 30 amps max
MCT-3500
1750W/4OHMS PER CH STEREO POWERAMP
RRP $4750
Designed for use in a variety of applications in the fixed installation market where sonic quality is the highest priority, the T3500 at 1850W per channel will bring the well renowned MC2 sound quality and reliability to a wider range of users.
Building on the MC2 commitment to sound quality and reliability, this exciting new amplifier has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls. The sound quality is maintained over a very wide range of load and temperature conditions. New, low distortion optical limiters with automatic response times, ensure speaker protection whilst maintaining transparent sonic performance.
The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed ‘turn on’.
Features
Complementary class A/B bipolar outputs, using the unique MC2 current driven floating drive stage, which gives one of the "cleanest" sounds available.
Sophisticated monitoring of amplifier temperature and load conditions.
Proprietary control and protection circuitry continuously checks for all fault conditions such as shorted outputs, DC on outputs, excessive temperature (blocked air flow), component failure etc? and disconnects the outputs if such an event occurs.
Low noise vari-speed fans.
Low distortion optical limiters prevent speaker damage from clipped signals whilst maintaining transparent sonic performance.
Audio "fade-up" on Power-on.
Optional internal crossover cards available.
New proprietary "Ultra Cool" heatsink.
Full mains inrush protection.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x stereo/bridged mono switch
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
1 x auto protect, 1 x bridged
Specification
(Power ratings at 240v supply, unit set to operate at 240v)
Output Power per channel, continuous music (Watts) :
8 ohms @ 1kHz: 950
4 ohms @ 1kHz: 1850
Output Power per channel, continuous sine wave (Watts RMS) :
8 ohms @ 1kHz: 950
4 ohms @ 1kHz: 1700
2 ohms @ 1kHz: Not designed to operate into 2 ohms
Mono Bridged
8 ohms @ 1kHz: 3300
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: 32/36dB (Internally selectable)
Sensitivity for rated output, 4 ohms: +8.5dBu / +4.5dBu (+2.0v / +1.3v) (Internally selectable)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz - +0/-0.5 dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 22.5kg
*Power Requirements: 220/230/240 VAC (Internally selectable) @ 12.0 amps (Nominal)
100 / 120 VAC (Internally selectable) @ 24.0 amps (Nominal)
MCT-4-250
250W PER CH 4-CHANNEL POWERAMP
RRP $2995
Designed for use in multi-zone installations, where sonic quality and reliability are the highest priorities. The T4-250 is a 4 x 250W amplifier housed in a 2U chassis and has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls.
The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping.
The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'.
Features
• Complementary class A/B bipolar outputs, using the unique MC2 current driven floating drive stage, which gives one of the 'cleanest' sounds available.
• Sophisticated monitoring of amplifier temperature and load conditions.
• Proprietary control and protection circuitry continuously checks for all fault conditions such as shorted outputs, DC on outputs, excessive temperature (blocked air flow), component failure etc… and disconnects the outputs, if such an event occurs.
• Low noise vari-speed fans.
• Side-chain' clip limiter prevents speaker damage from clipped signals but only comes into the signal path during limiting, and is inaudible during normal operation.
• Audio 'fade-up' on Power-on.
• Optional internal crossover cards available.
• New proprietary 'Ultra Cool' heatsink.
• Full mains inrush protection.
• Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4-pole Speakon
Controls
Rear Panel: 1 x stereo/bridged mono switch
Front Panel: 4 level controls, 1 x power on/off switch
Indicators: 1 x power, 4 x limit, 4 x signal present
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 175
4 ohms @ 1kHz: 250
2 ohms @ 1kHz: 400 (Ch. C & Ch. D ONLY)
Mono Bridged
8 ohms @ 1kHz: 550
4 ohms @ 1kHz: 800
THD @ Rated Power 4 ohms
1 kHz: < 0.008%
20Hz - 20kHz: < 0.03%
Input CMRR: > 90 dB
Hum & Noise: -105 dB
Gain: +32dB
Sensitivity for rated output, 4 ohms: +1dBu (870mV)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5 dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 18kg
Power Requirement: 230 VAC @ 8.0 amps max
115 VAC @ 16.0 amps max
T-500
250W/4OHMS PER CH STEREO POWERAMP
RRP $1795
Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T500 (250W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls.
The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'.
Features
Complementary class A/B bipolar outputs, using the unique MC2 current driven floating drive stage, which gives one of the 'cleanest' sounds available.
Sophisticated monitoring of amplifier temperature and load conditions.
Proprietary control and protection circuitry continuously checks for all fault conditions such as shorted outputs, DC on outputs, excessive temperature (blocked air flow), component failure etc... and disconnects the outputs, if such an event occurs.
Low noise vari-speed fans.
'Side-chain' clip limiter prevents speaker damage from clipped signals but only comes into the signal path during limiting, and is inaudible during normal operation.
Audio 'fade-up' on Power-on.
Optional internal crossover cards available.
New proprietary 'Ultra Cool' heatsink.
Full mains inrush protection.
Full 5-year warranty.
Controls
Connectors
Inputs: XLR 3 pin
Outputs: 4 pole SPEAKON
Controls
Rear Panel: 1 x stereo/bridged mono switch
Front Panel: 2 x level controls
1 x power on/off switch
Indicators: 1 x power, 2 x limit, 2 x signal present
1 x auto protect, 1 x bridged
Specification
Output Power (Watts RMS) per channel :
8 ohms @ 1kHz: 175
4 ohms @ 1kHz: 250
2 ohms @ 1kHz: -
Mono Bridged
8 ohms @ 1kHz: 500
4 ohms @ 1kHz: -
THD @ Rated Power 4 ohms
1 kHz: <0.008%
20Hz - 20kHz: <0.03%
Input CMRR: >90 dB
Hum & Noise: -105 dB
Gain: +32dB
Sensitivity for rated output, 4 ohms: +1dBu (870mV)
Damping Factor 1 kHz, 8 ohms: > 400
Frequency Response: 20Hz-20kHz +0/-0.5 dB
Input Impedance
(actively balanced): 20k ohms
Dimensions - 2U(mm): 88 x 482 x 428
Weight: 15kg
Power Requirement: 230 VAC @ 6 amps max
115 VAC @ 12 amps max
